|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 93-23/R6SGHB7C-A02/2T Features Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself will remain within RoHS compliant version. Descriptions Due to the package design, 93-23 has low power consumption and adjusting each color is possible thanks to serial connection by 6 terminal connection (Individual driving by each terminal) in case of using several number of LED. And makes it ideal for light pipe application. Applications Amusement equipment. Information boards. Flashlight for digital camera of cellular phone. Device Selection Guide Chip Type R6S GH B7 Material AlGaInP InGaN InGaN Emitted Color Brilliant Red Brilliant Green Blue Water Clear Lens Color Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 5-Sep-2006 Rev. 1 Page: 1 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Package Outline Dimensions 3.5 1 3 5 1 3 5 3.0 2.7 R G B 2 4 6 2 4 6 Cathode Mark 3.5 2.7 1.85 2.95 3.0 3.5 1.7 0.5 0.3 0.8 Notes: 1.All dimensions are in millimeters. 2.Tolerances unspecified are 0.1mm. Everlight Electronics Co., Ltd. Device No.: 3.0 http://www.everlight.com Prepared date: 5-Sep-2006 2.7 4.5 1.1 Rev. 1 1.85 Page: 2 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Symbol VR R6S IF GH B7 R6S Peak Forward Current (Duty 1/10 @ 1KHZ) IFP GH B7 R6S Power Dissipation Pd GH B7 R6S Electrostatic Discharge(HBM) ESD GH B7 Operating Temperature Storage Temperature Soldering Temperature Topr Tstg Tsol Rating 5 50 25 30 100 100 100 120 110 110 2000 150 150 -40 ~ +85 -40~ +90 V mW mA mA Unit V Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 5-Sep-2006 Rev. 1 Page: 3 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Electro-Optical Characteristics (Ta=25) Parameter Symbol R6S Luminous Intensity Iv GH B7 Viewing Angle 21/2 R6S Peak Wavelength p GH B7 R6S Dominant Wavelength d GH B7 R6S Spectrum Radiation Bandwidth GH B7 R6S Forward Voltage Min. 180 715 140 ----------------------------------------------------------------- Typ. 265 1010 240 120 632 518 468 624 525 470 20 35 35 2.0 3.3 3.3 ------------- Max. ----------------------------------------------------2.4 3.7 3.7 10 50 50 Unit Condition IF=20mA mcd IF=20mA IF=20mA deg IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA VF GH B7 R6S V IF=20mA Reverse Current IR GH B7 A VR=5V Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 5-Sep-2006 Rev. 1 Page: 4 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Typical Electro-Optical Characteristics Curves (Red) Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 5-Sep-2006 Rev. 1 Page: 5 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Typical Electro-Optical Characteristics Curves (Green) Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 5-Sep-2006 Rev. 1 Page: 6 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Typical Electro-Optical Characteristics Curves (Blue) Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 5-Sep-2006 Rev. 1 Page: 7 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 5-Sep-2006 Rev. 1 Page: 8 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is 0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 5-Sep-2006 Rev. 1 Page: 9 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. Items Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS. 0/1 1 Reflow Soldering 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock 300 Cycles 22 PCS. 1000 Hrs. 22 PCS. 1000 Hrs. 0/1 4 High Temperature Storage Low Temperature Storage 0/1 5 Temp. : -40 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 5-Sep-2006 Rev. 1 Page: 10 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260 C Max 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 5-Sep-2006 Rev. 1 Page: 11 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 5-Sep-2006 Rev. 1 Page: 12 of 12 Prepared by: Ya_Hui Fang |
Price & Availability of 93-23R6SGHB7C-A022T |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |